KEENLAB – KWELD CABLE AND ELECTRODE HOLDER SET – ASSEMBLED
Brands: Keenlab
Product Code: kWeld – Cable and Electrode Holder Set – Assembled
Availability: Pre-Order
$60.90
All bits and pieces that are required to fully assemble the kWeld cabling, including a pair of electrode holders. The power input connection consists of loose cable ends, you need to add a connector that matches your power source. Suitable XT150 power connectors are available in the shop. This set can be purchased with or without assembly service.
Without assembly service: you receive all parts (cable in one piece) and process them by yourself. This requires access to a suitable crimping tool with inserts for 6.5mm diameters, and a heat gun. A detailed assembly guide is part of the system assembly manual.
With assembly service: choose this option, if you like to receive fully machined and assembled parts.
| 2 | CNC machined copper electrode holder |
| 1m | AWG8 silicon high flex wire, red |
| 4 | 10qmm / M6 ring cable shoe |
| 4 | isolation caps for cable shoes |
| 2 | heat shrink tubing, diameter=12mm, length=85mm |
This article is already included in the kWeld Complete Kit and sold here separately to allow purchasing only specific components of the kit. You decide which parts of the complete system you want to purchase and which parts you want to source yourself locally.
The assembly and operating manuals are available on this website for download (https://www.keenlab.de/wp-content/uploads/2018/07/kWeld-assembly-manual-r5.0.pdf – https://www.keenlab.de/wp-content/uploads/2018/07/kWeld-operation-manual-r3.0.pdf). Please make sure to study them carefully in order to ensure safe and reliable operation.
| SPECIFICATIONS | |
| Weight | 200 g |
| MANUFACTURER’S WARRANTY | |
| Important Note | Lithium Polymer batteries are potentially dangerous. If they fail internally, they can spontaneously self-ignite. It is therefore strongly advised to permanently supervise them during use and also while charging them, and to store them in a fire safe container when not using them. |
| Warning | You are dealing with very high energy levels when using this system, which may result in personal injury or fire when handled improperly. Take appropriate safety measures and use this system with caution. Never leave it unattended while being powered. This product contains small parts, keep out of reach of children! This system produces significant magnet fields, do not use it when you have a cardiac pacemaker! |
| Manufacturer’s Warranty | Disclaimer: This kit is provided as is without any guarantees or warranty, except where obliged by national law. In association with the product, www.keenlab.de and www.hiketech.com.au makes no warranties of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, of title, or of noninfringement of third party rights. Use of the kit by a user is at the user’s risk. In no event shall www.keenlab.de and/or www.hiketech.com.au be liable for any direct, indirect, punitive, incidental, special, or consequential damages whatsoever arising out of or connected with the use or misuse of any product purchased herein. You agree and acknowledge that any product purchased should be used at your own risk and you should assess the risks before purchasing any product or using any product. You agree that in the event that www.keenlab.de and/or www.hiketech.com.au is deemed liable for any harm caused, the amount which it shall be liable to you shall be limited to the cost of the product. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A SPECIFIC PURPOSE, THE PRODUCTS TO WHICH THE INFORMATION MENTIONS MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS, OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION MENTIONS. IN NO CASE SHALL THE INFORMATION BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. |
There are no reviews yet.